Seal Liquid Monitor Model V2K |
|
|---|---|
This SLM has been specifically design for standard seal liquid applications. The V-meter is a good choice for any seal water application that exceeds 3.5 USGPM, up to a maximum of 8.5 USGPM. A pressurizing valve is available as an accessory for the V-meter, if required. In the dual tube setup the first V2K-meter measures the flow to the seal and the second flow tube measures the flow from the seal (usually called the seal drain). This is the same arrangement as the dual SLMx-2. With this arrangement, the seal condition can be reported. If the flow to the seal is less than the flow out of the seal, then the seal is leaking from the process. If the flow to the seal is more than the flow from the seal, then the seal water is leaking into the process." |
|
| Uses | Technical Specifications |
| • Gas flow measurement | • Industrial meter for water or air |
| • Oil lubrication | • Flow range water 8.5 USGPM (32.5 LPM) |
| • Sealing and cooling water | • Flow range air 45 SCFH (1100 NLPM) |
| Features | • 1/2" NPT connections |
| • Heavy duty construction | • Max pressure 440 psi (30 bar) |
| • Long lasting polymer flowtube | • Max temperature175°F (80°C) |
| • Flow adjustment valve on inlet | Options (not all shown) |
| • Custom calibration, scale and markings | • Constant flow regulator |
| • Quick change tube | • Inductive low and/or high flow alarm |
| • Scale for alternative gases and liquids | |
| • BSP connection | |
Variable Area Flow Meter Model V Brochure |
|
Seal Liquid Monitor Model K2K |
|
|---|---|
This SLM has been specifically design for standard seal liquid applications. The K-meter can be used with flows up to 35 USGPM in seal water or flush applications. For more exotic seal water applications, K meters are being used for example, in the mining industry for special pump applications and copper refining. In the dual tube setup the first K2K-meter measures the flow to the seal and the second flow tube measures the flow from the seal (usually called the seal drain). This is the same arrangement as the dual SLMx-2. With this arrangement, the seal condition can be reported. If the flow to the seal is less than the flow out of the seal, then the seal is leaking from the process. If the flow to the seal is more than the flow from the seal, then the seal water is leaking into the process." |
|
| Uses | Technical Specifications |
| • Gas flow measurement | • Industrial meter for air |
| • Oil lubrication measurement | • Flow range air 110 SCFH (2800 NLPM) |
| • Seal water measurement | • 1" NPT connections |
| Features | • Max pressure 440 psi (30 bar) |
| • Heavy duty construction | • Max temperature 175°F (80°C) |
| • Long lasting polymer flowtube | Options (not all shown) |
| • Flow adjustment valve on inlet | • Inductive low and/or high flow alarm |
| • Quick change tube | • Scale for alternative gases and liquids |
| • BSP connection | |
| Variable Area Flow Meter Model K Brochure |
|
